Milacron Eclipse Model E 75 Dual 2.5 Pound
BLOW MOLDER 1990’s (S/N 4462A01/92-1)
2 Heads and New Control
Delivery: From Warehouse-Available Immediately.
§ Auto-tune PID temperature control
§ Grooved feed option (90mm) provides higher output at lower melt temperatures
§ Meltstar feed screw provides low shear, superior color dispersion, and excellent melt consistency
§ Barrel lined with hardened, bimetallic sleeves
§ Cyclone spiral design provides controlled material layering, eliminating knit lines
§ Spiral design provides quick color and resin changes
§ Melt streams flow radially and axially through head
§ Multiple inlets into spiral balance the head, result in straight parison drop, and eliminate need for wear pads
§ Blow & (1) Pre-Blow Circuit per head
§ Fast, precise, dual toggle design
§ Rigid 4 tie bar construction
§ Proportional clamp speed control
§ Proportional servo hydraulics provide excellent consistency and speed control
§ Clamp module supported on base for superior stability and minimal deflection
Clamp Specifications Units E75 Clamp Force tons (kN) 50 (445) Head Centers (dual) in (mm) 12 (304) Clamp Stroke in (mm) 20 (508) in (mm) 15 (381) to in (mm) 20 (508) in (mm) 35 (889) to in (mm) 40 (1016) Head Adjustment from C/L along extruder axis in (mm) +2.5 Vertical Adjustment Clamp in (mm) 0 Tie Bars qty 4 Clamp Close Velocity in/s (mm/s) 0-20 (508) Settable Closing Velocity qty 3 Clamp Open Velocity in/s (mm/s) 0-20 (508) Settable Open Velocity qty 2 Mold Weight Maximum (x1,000) lb (kg) 4 (1.8) Platen Dimensions Units E75 Dimension A in (mm) 26 (660) Dimension B in (mm) 26 (660) Dimension C in (mm) 39.1 (993) Dimension D in (mm) 1 (25.4) Dimension E in (mm) 5 (127) Dimension F in (mm) 3 (76.2) Dimension G in (mm) 6 (152.4) Mold Mounting Holes in (mm) 0.56 (14.22) dia, thru typ
O V E R A L L D I M E N S I O N S Units E75 O.A. Length - dim. A in (mm) 170.4 (4329) O.A. Width - dim. B1 (w/o PTO) in (mm) 52 (1321) O.A. Width - dim. B2 (w/ PTO) in (mm) 125.3 (3183) O.A. Height - dim. C 2.5 lb Head in (mm) 146.5 (3721) Weight x 1000 (approx.)** lb (kg) 16 (7.3) Floor Loading psi 75 Electric Motor Units E75 Motor Current-FLI Hyd Pump Capacity-Extruder/Push-out hp (kW) 75 (55.9) Hyd Pump Capacity-Extruder/Push-out amps 90 Hyd Pump Capacity-Clamp/Program Cyl gmp (Lpm) 45 (170) Hyd Pump Type gpm (Lpm) 25 (95) Operating Pressure gpm (Lpm) 12.7 (48) Reservoir Capacity var. disp./axial piston Oil Filter Size psi (bar) 2000 (140) Cooling Capacity; 85ºF@35PSIG gal (L) 200 (757) micron 3/10 gpm (Lpm) 20 (70)
H Y D R A U L I C P O W E R U N I T